CPH5818 no.7447-1/5 features ? composite type with a p-channel sillicon mosfet (mch3339) and a schottky barrier diode (sbs007m) contained in one package facilitating high-density mounting. [mosfet] ? low on-resistance. ? ultrahigh-speed switching. [sbd] ? short reverse recovery time . ? low forward voltage . sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7447 CPH5818 package dimensions unit : mm 2171 [CPH5818] 32603 ts im ta-3843 mosfet : p-channel silicon mosfet sbd : schottky barrier diode dc / dc converter applications specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit [mosfet] drain-to-source voltage v dss --12 v gate-to-source voltage v gss 12 v drain current (dc) i d --1.5 a drain current (pulse) i dp pw 10 m s, duty cycle 1% --6.0 a allowable power dissipation p d mounted on a ceramic board (600mm 2 5 0.8mm) 1unit 0.8 w channel temperature tch 150 c storage temperature tstg --55 to +125 c [sbd] repetitive peak reverse voltage v rrm 15 v nonrepetitive peak reverse surge voltage v rsm 15 v average output current i o 0.5 a surge forward current i fsm 50hz sine wave, 1 cycle 3 a junction temperature tj --55 to +125 c storage temperature tstg --55 to +125 c marking : qu any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 1.6 0.6 0.6 2.8 0.2 2.9 0.05 0.4 0.95 0.2 0.9 0.7 0.15 0.4 12 3 4 5 1 : cathode 2 : drain 3 : gate 4 : source 5 : anode sanyo : cph5
CPH5818 no.7447-2/5 electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit [mosfet] drain-to-source breakdown voltage v (br)dss i d =--1ma, v gs =0 --12 v zero-gate voltage drain current i dss v ds =--12v, v gs =0 --1 m a gate-to-source leakage current i gss v gs = 9.6v, v ds =0 10 m a cutoff voltage v gs (off) v ds =--6v, i d =--1ma --1.0 --2.4 v forward transfer admittance ? yfs ? v ds =--6v, i d =--0.8a 0.9 1.4 s r ds (on)1 i d =--0.8a, v gs =--10v 200 270 m w static drain-to-source on-state resistance r ds (on)2 i d =--0.4a, v gs =--4.5v 340 490 m w r ds (on)3 i d =--0.1a, v gs =--4v 370 530 m w input capacitance ciss v ds =--6v, f=1mhz 145 pf output capacitance coss v ds =--6v, f=1mhz 45 pf reverse transfer capacitance crss v ds =--6v, f=1mhz 35 pf turn-on delay time t d (on) see specified test circuit 7.5 ns rise time t r see specified test circuit 20 ns turn-off delay time t d (off) see specified test circuit 16 ns fall time t f see specified test circuit 12 ns total gate charge qg v ds =--10v, v gs =--10v, i d =--1.5a 3.8 nc gate-to-source charge qgs v ds =--10v, v gs =--10v, i d =--1.5a 0.5 nc gate-to-drain miller charge qgd v ds =--10v, v gs =--10v, i d =--1.5a 0.5 nc diode forward voltage v sd i s =--1.5a, v gs =0 --0.94 --1.5 v [sbd] reverse voltage v r i r =0.5ma 15 v forward voltage v f 1i f =0.3a 0.35 0.41 v v f 2i f =0.5a 0.4 0.46 v reverse current i r v r =6v 200 m a interterminal capacitance c v r =10v, f=1mhz cycle 20 pf reverse recovery time t rr i f =i r =100ma, see specified test circuit. 10 ns electrical connection switching time test circuit trr test circuit [mosfet] [sbd] pw=10 m s d.c. 1% p. g 50 w g s d i d = --0.8a r l =12.5 w v dd = --10v v out CPH5818 v in 0v --10v v in duty 10% 50 w 100 w 10 w --5v t rr 100ma 100ma 10ma 10 m s 12 (top view) 543 1 : gathode 2 : drain 3 : gate 4 : source 5 : anode
CPH5818 no.7447-3/5 0 --2 --4 --6 --8 --10 --12 200 400 600 800 100 300 500 700 0 100 200 300 400 500 600 700 800 0 r ds (on) -- v gs static drain-to-source on-state resistance, r ds (on) -- m w 0 0 --0.8 --1.2 --1.6 --2.0 --0.2 --0.4 --0.6 --1.0 --1.4 --1.8 --0.2 0 --0.6 --0.4 --2.0 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 --0.2 --1.0 --0.8 --0.6 drain-to-source voltage, v ds -- v i d -- v ds drain current, i d -- a it05613 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 gate-to-source voltage, v gs -- v i d -- v gs drain current, i d -- a it05614 r ds (on) -- ta static drain-to-source on-state resistance, r ds (on) -- m w --60 --40 --20 0 20 40 60 80 100 120 140 160 --0.4 --0.1 --0.9 --0.7 --0.5 --0.3 --3.0v v gs = --2.5v --10v --6.0v --4.5v --4.0v ta=75 c 25 c --25 c v ds = --10v ta=25 c i d = --0.8a, v gs = --10v i d = --0.1a, v gs = --4.0v i d = --0.4a, v gs = --4.5v it05617 --0.01 1.0 --0.1 23 57 --1.0 23 57 23 57 --10 0.1 5 7 3 2 5 7 3 2 10 ? y fs ? -- i d ta= --25 c v ds = --10v 75 c 25 c forward transfer admittance, ? y fs ? -- s drain current, i d -- a it05618 --0.8 --1.0 --0.6 --1.2 i f -- v sd --0.4 --0.01 --0.1 --10 --1.0 7 5 3 2 7 5 3 2 7 5 3 2 v gs =0 75 c 25 c ta= --25 c diode forward voltage, v sd -- v forward drain current, i f -- a 1.0 --0.01 --0.1 23 57 --1.0 --10 23 5 723 5 7 3 5 2 7 3 5 2 7 100 3 5 2 7 1000 10 drain current, i d -- a sw time -- i d switching time, sw time -- ns it05619 v dd = --10v v gs = --10v t d (off) t d (on) t r t f 0 100 5 7 2 3 2 3 10 --12 --4 --6 --8 --10 -- 2 drain-to-source voltage, v ds -- v ciss, coss, crss -- v ds ciss, coss, crss -- pf it05620 ciss coss crss f=1mhz gate-to-source voltage, v gs -- v it05615 ambient temperature, ta -- c it05616 [mosfet] [mosfet] [mosfet] [mosfet] [mosfet] [mosfet] [mosfet] [mosfet] --0.4a id= --0.1a --0.8a
CPH5818 no.7447-4/5 ambient temperature, ta -- c it05891 0 0 20 40 60 80 100 120 0.6 0.8 0.4 0.2 1.0 140 160 p d -- ta allowable power dissipation, p d -- w mounted on a ceramic board(600mm 2 5 0.8mm) 1unit 0 0 -- 8 -- 9 4 3 2 1 --10 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 total gate charge, qg -- nc v gs -- qg gate-to-source voltage, v gs -- v it05621 v ds = --10v i d = --1.5a a s o drain-to-source voltage, v ds -- v drain current, i d -- a 2 3 5 7 2 3 5 7 2 3 5 7 --10 --1.0 --0.1 --0.01 23 57 23 57 2 5 3 --0.01 --0.1 --1.0 23 57 --10 it05890 100 m s < 10 m s 1ms 10ms i d = --1.5a i dp = --6a operation in this area is limited by r ds (on). dc operation 100ms ta=25 c single pulse mounted on a ceramic board(600mm 2 5 0.8mm) 1unit 180 360 (2) (4) (3) (1) 0 0 0.1 0.2 0.3 0.4 0.4 0.35 0.3 0.2 0.15 0.1 0.05 0.25 0.5 0.6 0.7 p f (av) -- i o it02955 (1)rectangular wave q =60 (2)rectangular wave q =120 (3)rectangular wave q =180 (4)sine wave q =180 average forward current, i o -- a average forward power dissipation, p f (av) -- w q 360 rectangular wave sine wave 1.0 10 2 3 5 7 100 2 3 5 7 1.0 10 23 57 23 c -- v r f=1mhz it02956 reverse voltage, v r -- v interterminal capacitance, c -- pf 0 0.3 0.4 0.5 0.1 0.2 0.01 1.0 2 0.1 7 5 3 2 7 5 3 2 i f -- v f it02953 forward voltage, v f -- v forward current, i f -- a from top ta=125 c 100 c 75 c 50 c 25 c 0 0.001 100 10 5 7 3 2 1.0 5 7 3 2 0.1 5 7 3 2 0.01 5 7 3 2 5 7 3 2 15 510 i r -- v r ta=125 c 25 c 50 c 75 c 100 c it02954 reverse voltage, v r -- v reverse current, i r -- ma [mosfet] [mosfet] [mosfet] [sbd] [sbd] [sbd] [sbd]
CPH5818 no.7447-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of march, 2003. specifications and information herein are subject to change without notice. ps 7 0.01 23 7 0.1 0 52 2 37 1.0 5 3.5 2.5 3.0 2.0 1.5 1.0 0.5 3 time, t -- s i s -- t surge forward current, i s -- a it05889 i s 20ms t current waveform 50hz sine wave [sbd]
|
